How to install windows 10 on Toshiba XG4 NVMe SSD in ThinkServer TS140

[zzutmebwd]

标题是因为英文词太多所以全用英文了。
之前撸了一块比较便宜的 XG4，今天装到电脑上傻眼了，电脑能识别，但启动项中找不到，于是谷歌查了下：

目前仅有的资料为：

https://forums.lenovo.com/t5/ThinkServer/Update-BIOS-on-TS140-to-support-SSD-PCIe-ACHI-and-PCI-NVMe/td-p/3474727

I'm currently running the B7A firmware on my TS140, and am able to boot off an Intel 750 NVMe PCIe SSD without issue. I really didn't have high hopes it would work, but despite no evidence of support in the release notes, it did! I've been a little wary about upgrading the firmware in case the ability to boot off the NVMe drive is withdrawn.

The firmware must not be configured to emulate a legacy BIOS (use full UEFI mode instead), and I'm running Solaris 11.3, but any compatible OS (with NVMe drivers) might also work. Just sharing my experience, so of course, your mileage may vary.

请问如何使用 full UEFI mode 安装 win10 ？
原谅我的无知，之前重装系统都会打开 PE 默默把 GPT 磁盘转换为 MBR 格式 然后用 windows 安装器...

[TroyChen]

先把盘分区表改回 GPT，不要建立任何分区；
挂载 Win10 安装镜像，把里面所有文件都复制到 PE 优盘里；
进 PE，运行优盘里 setup.exe ，选自定义安装，磁盘表里选中固态盘－新建（自动分出 EFI 和恢复分区）－选中分好固态分区－安装；
安装完开始自动重启后拔掉优盘，拔掉优盘，拔掉优盘，没问题的话就直接从固态启动了，接下来完成后继安装就好了。

[zzutmebwd]

@TroyChen 膜拜大佬 23333

[x86vk]

xg4 好像还要装一个驱动 装完速度能快一点

[zzutmebwd]

@x86vk 恩恩 我放弃了 似乎是 bios 只能识别一部分 pcie 的固态......xg4 反正不行

[zj299792458]

NVMe 做启动盘似乎需要 BIOS 支持？